Have you been searching long and hard for an effective DIY substitute for a nail primer & dehydrator?
Well, your search is over ladies!
Here we will reveal the perfect one to make nail paints complement your nails in the best way possible.
Let’s paint the nails red!
First of all…
- What is a Nail Dehydrator and Primer?
- Difference between a Nail Dehydrator and a Nail Primer
- How to Make a Nail Primer and Dehydrator at home
- How to Prime Nails with Acetone and Alcohol
- Gel Nail Primer Substitute
- How does Alcohol work as a Nail Dehydrator and a Nail Primer?
- Acetone’s role as a Nail Dehydrator and Primer
- Final Words
What is a Nail Dehydrator and Primer?
To prime the nail, a primer is used at the start of the gel nail manicure. Any leftover oils and grease on the nail plate will be removed by primers, which will prevent the base coat from adhering to the nail. It also reduces the formation of air bubbles, resulting in improved adhesion.
Although the term “nail dehydrator” may conjure up images of raisins, prunes, and other dried fruits, it is simply a method of preparing your nails for nail painting.
Nail dehydrators dissolve oils on the nail surface, resulting in an ideal nail surface for applying polish. As a result, a smooth, clean surface is created, making it simpler for nail paints and acrylic nails to adhere. To keep the new nails smoky, start using a nail dehydrator right away.
Difference between a Nail Dehydrator and a Nail Primer
The most significant distinction between a nail dehydrator and a nail primer is that the latter can be utilized as a base coat for your manicure. A nail dehydrator is applied to your natural nail first, creating a surface on which nail polish and acrylic nails can readily adhere.
After that, a nail primer is applied. Most nail primers contain a little amount of nail dehydrator, but not enough to replace applying a full layer of nail dehydrator.
How to Make a Nail Primer and Dehydrator at home
Not wanting to spare out bucks on these nail tools? No need to be concerned! That's fine since we've got a really simple DIY for you! This DIY involves very little preparation and ingredients, making it extremely cost-effective. Here's what you'll require:
- A little bottle (about the size of a normal nail polish bottle)
- A brush for applying nail polish (to use later when putting it on your nails)
- Pure Isopropyl Alcohol
You probably already have some of these basic components in your kitchen! If that's the case, your DIY dehydrated nail paint will be free.
That's fantastic! If you don't have these products on hand, you'll have no trouble locating them at your local drugstore or grocery shop.
- Everything You Need To Know About Electric Nail Files & Drills
- 8 Best Gel Nail Polish Brands On Amazon to give your nails a Sassy Look
- The 9 Best UV/LED Nail Lamps: Reviews & Guide 2021
- How To Remove False Nails Attached With Nail Glue
- How to Dry Nail Polish Fast With Hairspray? Easiest Ways you will ever find!
Here are the steps for building a simple and high-quality nail dehydrator and gel nail primer substitute:
- Calculate how many ounces of nail dehydrator you'll need. (For example, 6 ounces total)
- 6/2 = 3 ounces is the result of dividing that amount by two.
- Fill the bottle with that much Acetone (3 ounces)
- Then the equal amount of Pure Isopropyl Alcohol should be added (3 ounces)
- Combine the ingredients and stir well.
You can make your own nail dehydrator at home in only 5 easy steps, and it will save you money and be of the same quality as those seen at nail salons! This simple DIY will improve the health and vibrancy of your nails.
How to Prime Nails with Acetone and Alcohol
Applying a coat of alcohol followed by a coat of acetone to your nails is the quickest and easiest way to build a nail dehydrator.
Here are the quick steps
- Apply a coat of Isopropyl Alcohol to your nails with an old but clean nail paintbrush.
- After the alcohol has completely evaporated, add a coat of acetone to your nails.
- Allow the acetone to evaporate after that.
- Finally, after the acetone has completely dried, you can begin applying your goods.
When applying the acetone and alcohol, avoid using cotton swabs because they might leave residue on your nails. Instead, you can apply the polish with an old nail polish brush. Make sure the nail polish brush is properly cleansed; acetone can be used to do so.
If you have the time, you can also combine the two materials in an empty nail polish bottle. 1 part acetone, 1 part alcohol is what I recommend.
You must make certain that the bottle you use can handle the acetone and that it can be tightly closed. Bottles of nail polish are normally safe to use.
Also, read our ultra-essential nail polish expiration guide to be well informed about nail polish and its expiry.
I recommend using 99% Pure Isopropyl Alcohol since it has the least amount of water. You can click here to see the brand that I use and the price on Amazon.*
Gel Nail Primer Substitute
Leave the wraps on for 10 to 15 minutes before removing them. If you're not doing acrylic or gel nails, you may just use a mid-strength (between 30 and 50 percent) acetone to dehydrate them instead of priming.
When working with acrylics, for example, a primer is nearly always required; a bonder should not be used instead.
Use a base coat to protect your nails. Acetone and isopropyl alcohol, when used correctly together, may eliminate the majority of the oil and moisture from your nails, allowing your acrylics and gel polish to remain longer without lifting.
How does Alcohol work as a Nail Dehydrator and a Nail Primer?
Isopropyl Alcohol is found in most nail dehydrators in modest amounts. The alcohol disinfects your nails by destroying any hazardous bacteria that may be present on their surface. Another advantage of using alcohol is that it can help dissolve some of the oil deposits on your nails, making acetone cleaning easier.
You should only use highly concentrated alcohol because less concentrated alcohol contains a lot of water, which can leave moisture on your nails.
Because it has the least quantity of water, I recommend using 99 percent Pure Isopropyl Alcohol.
Acetone’s role as a Nail Dehydrator and Primer
Remove the greasy layer from your nails
When acetone is applied to your nails, it breaks down the majority of the oily deposits and then evaporates, removing them.
Dehumidify the Nail Plates by removing any moisture
Acetone is a highly flammable liquid that quickly evaporates at ambient temperature. Because of the rapid evaporation, it can act as a dehydrator by forcing the moisture on your nails to evaporate as well. Acetates are used in most dehydrators for this purpose, however, acetone can be used instead.
Like alcohol, you must use pure acetone because some brands have additives that can leave residues, reducing the acetone's ability to serve as a dehydrator.
I usually use 99% pure acetone, you can click here to see the brand that I use and to see the price on Amazon.*
So that’s it beauties!
The best DIY substitute for a nail primer & dehydrator!
A nail primer and dehydrator can really make nail paint on your nails stand out but if they are inaccessible to you because of any reason, you stumbled upon this website at the perfect time.
So what you will use a nail primer and dehydrator for and how will you use it?
Comment in the section below!
Also, don’t forget to check out our Best Nail Polish Dryers to dry your nail paint at the speed of light.
Until next time and beyond…
Keep rocking, keep stealing hearts!